Refrigerated Truck Bodies

A body that doesn't fit your chassis costs you twice

Every UFON body is engineered around your chassis and cargo — FRP foam-core sandwich panels up to 100 mm, multi-temperature ready, delivered CBU, SKD or flat-packed CKD with full drawing sets.

One box, eight engineered modules

Every UFON body is designed as eight replaceable modules — repair, upgrade or flat-pack exactly what you need.

Drag to rotate · Scroll to zoom · Click a part

Structural illustration — not to scale; final dimensions follow engineering drawings.

  1. 01

    Roof Panel

    One-piece insulated sandwich roof — FRP gelcoat skin over PU / XPS core up to 100 mm. Aerodynamic front nose fairing, internal roof beams and air-guide ribs keep airflow even front to rear.

  2. 02

    Front Panel

    Reinforced front wall with recessed mounting frame and fixing ears for the refrigeration unit — condenser outside, evaporator inside (Thermo King / Carrier options). Amber clearance lamps pre-fitted at top corners.

  3. 03

    Side Panel · Left

    FRP foam-core panel with gelcoat skin and internal rib grid. Interior embedded F-track ×2 with tie-down rings for cargo restraint; ECE reflective contour tape and UFON decal area outside.

  4. 04

    Side Panel · Right

    Same FRP foam-core construction as the left module, here shown with the optional 800×1700 mm side access door — aluminum door frame, perimeter rubber seal, twin hinges, lock rod with cam locks and handle.

  5. 05

    Floor System

    Anti-slip diamond 304 steel or aluminum floor over seven longitudinal T-shape air ducts forming the return-air path. Front drain ports with dam edge, stainless rear threshold plate, and perimeter coving for wash-down cleaning.

  6. 06

    Rear Door · Left

    Insulated 304 stainless door — mirror or matte finish, 2.2 mm frame. Perimeter rubber seal, twin vertical lock rods with upper/lower cam locks, three external hinges, and red ECE reflective tape.

  7. 07

    Rear Door · Right

    Matching insulated door completing the rear opening: synchronized lock rods and cam locks meeting at the center seam, center handle set, stainless corner protectors and rear clearance lamp position.

  8. 08

    Sub-Frame

    C-section longitudinal rails with seven cross-members — 2–9 mm high-strength aluminum or SS400 / Q325 steel, screw-connected for CKD shipping. Front mounting brackets, side guard rails and rear under-run beam included.

Side view of a refrigerated truck body with side access door, reflective tape and UFON branding
Rear view of an assembled refrigerated truck body with stainless steel double doors and cam locks

Stop shipping air — choose how your bodies arrive

Finished boxes burn freight budget. UFON ships the same body three ways: fully built (CBU), major assemblies pre-built (SKD), or flat-packed kits with drawing sets for local assembly (CKD).

CBU

Completely Built Up

Finished bodies, ready to mount on your chassis.

SKD

Semi Knocked Down

Major assemblies pre-built — panels, doors, sub-frame — for fast local mounting.

CKD

Completely Knocked Down

Flat-packed kits with full drawing sets for maximum freight savings and local assembly.

Specifications — from production data

All values below come from UFON production documentation. Body dimensions are fully customized to your chassis.

Panel thicknessUp to 100 mm, customized
Core optionsPU / XPS / PET / PP honeycomb
Skin optionsFRP/GRP gelcoat · Aluminum · 304 stainless · Galvanized
Panel frame typesNon-integrated / Timber / Fiberglass / Embedded E-F track
Door frame304 stainless or aluminum, 2.2 mm, polished or matte
Inner cargo trackAluminum / stainless / galvanized, 2.5–3.0 mm, horizontal or vertical
Sub-frame2–9 mm high-strength aluminum, SS400 or Q325 steel
Body dimensionsFully customized to chassis and cargo
Temperature range0 °C chilled · -20 °C frozen · -25 °C deep frozen
Close-up of a front-mounted refrigeration unit on a refrigerated truck body front panel
Close-up of refrigerated truck body rear door hardware with locking rods, cam locks and hinges
Close-up of a side access door on a refrigerated truck body with hinges and locking rod
Interior of a refrigerated truck body showing the evaporator unit, F-track cargo rails and T-rail floor

Multi-temperature in one body

Movable partitions divide one body into independent temperature zones — chilled, frozen and deep-frozen in a single trip.

Drag to rotate · Click a zone or partition

Structural illustration — zone layout follows your cargo plan.

Open-top cutaway of a multi-temp refrigerated truck body with three temperature zones
Cutaway side view of a multi-temp refrigerated truck body showing three temperature zones

Refrigerated & Insulated Truck Bodies

The box panel is the key component of a refrigerated body. UFON uses high-quality FRP/GRP foam-core sandwich panels with UV-resistant, waterproof and corrosion-resistant antibacterial gelcoat skins, insulated with XPS or PU foam cores. Innovative aluminum/steel-FRP skin options add superior strength, durability, scratch and weather resistance at competitive cost.

Refrigerated truck front view
Truck body in workshop
Isuzu refrigerated truck
Box truck render
Heavy refrigerated truck
Heavy refrigerated truck

01

Non-Integrated Panel

Basic sandwich design, ideal for small refrigerated boxes with low-strength requirements.

02

Timber Frame Panel

Waterproof wood frame enhances strength and simplifies accessory installation.

03

Fiberglass Frame Panel

High-strength, water-resistant and rot-proof frames — a 20 to 30 year lifespan.

04

Embedded E/F Track

Integrated cargo tracks keep side panels smooth and protect both cargo and track.

Customized Bodies & Components

UFON specializes in customizing both standard and non-standard components for refrigerated bodies, tailored to your design preferences and professional usage needs.

Rear & Side Doors

Rear & Side Doors

304 stainless steel, mirror or matte finish, customized sizes, exposed or hidden locks.

Door Frames

Door Frames

304 stainless or aluminum, 2.2 mm thickness, polished or matte surface.

Floor Systems

Floor Systems

Rectangular cross-section, T-shape duct, anti-slip diamond or flat 304 steel floors.

Sub-Frames

Sub-Frames

2–9 mm high-strength aluminum, SS400 or Q325 steel, polished, screw-connected.

Refrigeration Units

Refrigeration Units

Localized design support; authorized agent sales for Thermo King and Carrier.

Partitions & Tracks

Partitions & Tracks

Aluminum, stainless or galvanized inner tracks — horizontal or vertical, fully customized.

Multi-Temperature Design

Multi-temperature refrigerated trucks move goods with different storage requirements in a single trip — saving time and cost. Chilling and freezing zones in one body carry vegetables, fruits and flowers alongside meat, seafood, ice cream and pharmaceuticals.

0 °C Chilled-20 °C Frozen-25 °C Deep frozen
Multi-temperature truck design

Stop guessing specs — get an engineered answer

Send your chassis model, cargo and route. Our engineers reply within one business day with a tailored specification and a CBU / SKD / CKD delivery plan.